Maxcon
Antennas
Maxcon
17 South Ridge Trail
Cartersville GA 30120
PH# 470-315-7373
Specifications
Operating bands  10, 12, 17, 20, 40 & 80 meters without a tuner.
Resonant Freq. on 80 meters is 3.6 MHz
 Bandwidth 10m - 2000kHz, 20m - 500kHz, 40m - 400kHz, 80m 200kHz typical, (VSWR < 2.0:1)

(Max Operating power SSB
2000 Watt PEP
with a 25 % duty cycle
 
1000 Watt PEP with a 50% duty cycle
 
500 Watt CW
250 Watt  FT 8  and RTTY 

Typical impedance 40 ohm - 60 ohm (depending on installation height and configuration)
Gain 0.0 to 6 dBd
Effective Gain 12 dBi Typical (when mounted at 1 wavelength height)
VSWR 1.5:1 (typical)
Total length Dipole 133 feet.
OCF-3K80 Multi-Band Dipole
$79.95
The OCF-380  is designed for low to medium power levels.  It will work well on the 80, 40 ,20, 17,12, and 10 meter ham bands with no need for tuning.
The antenna can be mounted as a dipole or inverted vee. It is complete, cut, tuned, and ready to hang.

The OCF-3K80 is complete with a 4 to 1  Balun.  It can be fed with standard 50 ohm coax . It is 133 feet long. 45 feet on one Leg and 88 feet on the other.

The antenna wire is composed of 2 conductors with 7 strands per side.
4 strands are copper and 3 strands are steel. The wire is rated at 200 lbs tensile strength.
This wire will not kink and is very easy to handle.

The Center insulator is made of quality schedule 40 PVC and Quality zinc plate eyebolts

For the size, weight and cost, I simply do not think there is a better performing antenna when the user is limited to a single or wire type antenna. Multi-band, high performance and high power handling, with utmost simplicity and ease of use. You will not be disappointed.
OCF-3K80 Multi-Band Dipole with External Maxcon Line Isolator
OCF-3K80 Only
$129.90
g-button2.png
Home
Please Read Specifications Carefully